CEREC SpeedFire
Sirona CEREC Speedfire CADCAM Furnace

CEREC SpeedFire is capable of sintering a full-contour zirconia crown in 10 to 15 minutes, dependent upon size and volume. Designed for seamless integration into the CEREC workflow, the CEREC SpeedFire allows you to offer patients the strength of zirconia in a single visit. Simply design and mill restorations as usual, then sinter with CEREC SpeedFire. Finish with CEREC SpeedGlaze spray and the restoration is ready to seat.

• Sinter and glaze a full-contour zirconia crown with CEREC SpeedFire
• Follow a simple workflow to create zirconia restorations in 70 minutes
• Use a more durable, more cost-effective material to create stronger restorations

Compatible with conventional cements - no bonding required
Finished CEREC zirconia restorations can be seated with conventional cements. That includes glass ionomer cements and resin cements – even popular products like Ivoclar Vivadent Monobond Plus and SpeedCEM, Doxa Ceramir, 3M RelyX and Dentsply Calibra.

Chairside application
CEREC SpeedFire is capable of sintering a full-contour zirconia crown in 10 to 15 minutes, dependent upon size and volume. Designed for seamless integration into the CEREC workflow, the CEREC SpeedFire allows you to offer patients the strength of zirconia in a single visit. Simply design and mill restorations as usual, then sinter with CEREC SpeedFire. Finish with CEREC SpeedGlaze spray and the restoration is ready to seat.

Minimally Invasive
Requiring less reduction in tooth structure and a lower wall thickness, full contour restorations with zirconia provide ultimate strength and tooth preservation.

Perfect Fit
A pre-sintered state that's 25% larger leads to extremely precise margins and occlusal surfaces.

Efficient and simple workflow
Just 4 steps to a full contour zirconium oxide restoration: scan, design, mill, sinter and glaze

Model designation: CEREC SpeedFireType of protection against electric shock: Protection Class I device

Degree of protection against ingress of water: Ordinary device (without protection against ingress of water)

Setup location: Indoors in dry area

Operating altitude: ≤ 2000 m above sea level

Temperature range: 5°C to 35°C (41°F to 95°F) Relative humidity max. 80%

Pollution degree: 2

Mode of operation: Continuous operation

Dimensions of unit (W x H x D in mm): 250 x 425 x 425

Dimensions of packaged unit (W x H x D in mm): 400 x 600 x 500

Furnace chamber: Diameter 38 mm x 20 mm height

Maximum sintering temperature: 1600°C (2912°F)

Approx. weight without packaging: 21 kg

Approx. weight including packaging: 30 kg

Rated line voltage: AC 100V - 240V

Rated power frequency: 50/60Hz

Admissible line voltage fluctuations: ±10% of nominal voltage

Power consumption: max. 1200 W Interfaces: 2x USB 2.0 1x LAN (RJ45) WLAN (optional via WLAN USB dongle)

CEREC SpeedFire Brochure: Download