Miele has taken instrument reprocessing to a whole new level with the Miele PG 8581 undercounter washer-disinfector. The washer can reprocess up to 24 cassettes and 44 transmission instruments while delivering safe and consistently reproducible cleaning and disinfecting results. The unit also supports greater safety by requiring less handling of instruments, and efficient use of resources with less energy, water and chemical use.
Request a quote
The Miele PG 8581 dental washer-disinfector delivers safe and consistently reproducable results, ensuring dental instruments and handpieces are clean and disinfected. As a certified FDA Class II Medical Device with an exclusive Vario TD Dental 93 ̊C thermal-disinfection cleaning program, you’re assured a high level of confidence in the cleanliness of your instruments prior to sterilization. In addition, a variable speed heater pump allows for efficient use of resources and an EcoDry feature supports convenient drying. With wash-pressure and spray-arm monitoring, your staff will experience greater safety.
  • Greater peace of mind with repeatable, verifiable results
  • Increased staff and patient safety compared to manual and ultrasonic cleaning with less handling of instruments and fewer risks of “sharp” incidents
  • Minimum preparation with no pre-soak gel, foam or preparation solution needed for instruments within six hours of use
  • No scrubbing thanks to a cold water pre-wash included in the Vario TD program
  • Energy, water and chemical savings due to a combination of a heater variable speed pump and precise dosing
  • Protection of instruments and the stainless steel chamber with a neutralizer that creates a passivation layer
Unit dimensions
 
  • Machine dimensions H x W x D [mm, in.] 835, 32-7/8 x 600, 23-5/8 x 600, 23-5/8
  • Chamber size [L, cu.ft] 145, 5.12
  • Usable wash cabinet H x W x D [mm, in.] 520, 20-1/2 x 530, 20-7/8 x 520 20-1/2
Electrical
 
  • Default: 2AC 208V 30A 60Hz / 6.2KW / 3 x AWG 10; NEMA L6-30R required on site
  • Option: 3AC 208V 20A 60Hz
Plumbing
 
  • Cold water: 2 x 3/4 in. MGHT required on site / Flow rate 2 gpm (7.5L/min.) / Water pressure 14.5-145 psi (100-1,000 KPa), pressurized
  • Hot water: 1 x 3/4 in. MGHT required on site / Flow rate 2 gpm (7.5L/min.) / Water pressure 5.8-145 psi (40-1,000 KPa), pressurized
  • DI water: 1 x 3/4 in. MGHT required on site / Flow rate 2 gpm (7.5L/min.) / Water pressure 4.4-145 psi (30-1,000 KPa), pressurized. Below 29 psi = booster pump
  • Drain connection: 1 x 3/4 in. Barbed connector required on site / Flow rate 4.2 gpm (16L/min.)